Goro's Style Titanium Steel
Takahashi Goro's Style Titanium Steel Eagle Claw Feather Pendants Necklace
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Steel Claw Feather Pendants Necklace Set
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Goro Takahashi Style Titanium Steel Feather Necklace Set
- Goro's style classic chain set 60cm/70cm/80cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
Need a different length? Simply leave a note with your order.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Goro's Style Spread Eagle Titanium Pendant Necklace
Titanium spread eagle with Goro's style chain set. This pendant looks great for short length style around the collarbone. Exclusive Edition, not available in store.
- Pendant size: 8cm x 3cm
- Chain length 46cm (18"), 51cm (20"), 55cm (21.6"), 60cm (23.6")
- Titanium Stainless Steel
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Goro's Style Spread Eagle Turquoise Decal Titanium Necklace
Titanium spread eagle with Turquoise decal. Exclusive Limited Edition, not available in stores.
- Pendant size: 7cm x 2.8cm
- Chain length 50cm (19.69")
- Titanium Steel pendant and beads
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro style Titanium Turquoise Decal Feather Ring
Takahashi Goro style Titanium turquoise decal open ring
- High quality Titanium Steel, Turquoise decal
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro Style Feather Thunderbird Tag Titanium Ring
Takahashi Goro style Titanium open ring
- High quality Titanium Steel
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro style Turquoise Decal Feather Titanium Ring
Takahashi Goro style Titanium turquoise decal open ring
- High quality Titanium Steel, Turquoise decal
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro style Feather Titanium Ring
Takahashi Goro style feather Titanium ring
- High quality Titanium Steel, Turquoise decal
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Goro's Style Floral Titanium Steel Ring
- Size: 8, 9, 10
- High quality Titanium Steel
- Vintage finished, plated golden
- ID: 147
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Native American Style Thunderbird Turquoise Titanium Steel Pendant Necklace
- Pendant width 3cm; height 6.5cm
- Rolo Cable Wheat Chain 60cm/70cm/80cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- Comes with a Vintage finished chain.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Native American Thunderbird Eagle Turquoise Titanium Steel Pendant Necklace
- Pendant width 4cm; height 4.5cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Titanium Steel
Chrome Style Cross Titanium Steel Pendant Necklace
- Small Pendant: 25mm x 50mm
- Large Pendant: 35mm*60mm
- Rolo cable wheat chain
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Fleur De Lis Cross Titanium Steel Pendant Necklace
- Pendant: width 2.75cm, height: 4cm
- Chain option: Rolo cable wheat chain, Ball chain
- High quality Titanium Steel
- Vintage finished
- SKU: 742
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Medusa Skull Titanium Steel Pendant Necklace
- Pendant 45mm x 55mm
- Rolo Cable Wheat Chain 60cm/70cm/80cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Skull Coin Titanium Steel Pendant Necklace
- Pendant diameter 3cm
- Rolo Cable Wheat Chain 60cm/70cm/80cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Wild Hunt Wolf Titanium Steel Pendant Necklace
- Pendant, width 3.3cm, height 4cm
- Chain length: 60cm/70cm/80cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Necklace Chain Set
Goro's Style Titanium Stainless Steel Necklace
- New Edition, not available in stores
- Length: 45cm, 50cm, 55cm, 60cm, 65cm
- Titanium Stainless Steel
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Steel Claw Feather Pendants Necklace Set
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Steel Eagle Claw Feather Pendants Necklace
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Skull Guns Titanium Steel Ring
- High quality surgical stainless steel
- Vintage finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Lion King Titanium Steel Ring
- High Quality Titanium Steel
- Vintage Finished
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Featured Jewelry
Wild Hunt Wolf Titanium Steel Pendant Necklace
- Pendant, width 3.3cm, height 4cm
- Chain length: 60cm/70cm/80cm
- High quality Titanium Steel
- Vintage finished
✭ SPECIAL
- Choose your preferred chain length.
- We match chain color to the pendant.
- Free ECO-friendly waxed cord for DIY style.
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Goro Takahashi Style Native American Feather Pendant Solid 950 Silver Necklace Set
Goro's Style Native American new edition feather pendants, 18K Gold part available made-to-order, please contact us.
- New Edition, 1:1 Handcrafted
- Large pendant: approx. 6.8cm
- Small pendant: approx. 5.2cm
- Chain: 3.5mm
- Solid 950 Silver, Brass (Gold part)
- Deer leather cord color: Black, Dark Brown and Khaki (Leave a message on the check out page or contact us.)
Customization:
18K Gold available made-to-order
Free International Express Shipping
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goros Style Feather Pendant Solid 950 Silver Necklace Set
Goro's Style Native American new edition feather pendants, 18K Gold part available made-to-order, please contact us.
- New Edition, 1:1 Handcrafted
- Large pendant: approx. 6.8cm
- Small pendant: approx. 5.2cm
- Chain: 3.5mm
- Solid 950 Silver, Brass (Gold part)
- 18K Gold part available made-to-order please contact us
Free International Express Shipping
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goros Style Native American Feather Pendant Solid 950 Silver Necklace Set
Goro's Style Native American new edition feather pendants, 18K Gold part available made-to-order, please contact us.
- New Edition, 1:1 Handcrafted
- Large pendant: approx. 6.8cm
- Small pendant: approx. 5.2cm
- Chain: 3.5mm
- Solid 950 Silver, Brass (Gold part)
- 18K Gold part available made-to-order please contact us
Free International Express Shipping
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Steel Claw Feather Pendants Necklace Set
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP
Takahashi Goro's Style Titanium Steel Eagle Claw Feather Pendants Necklace
- Goro's style classic chain set 50cm/55cm/65cm
- New version pendants
- High quality Titanium Steel, Turquoise Decal
- Vintage finished, plated gold
| Necklaces | Bracelets | Rings |
|---|
Standard Necklace Sizes
45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum
▲ TOP
Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet.
If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.
Beaded Bracelets
- Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.
| Size | Centimeters | Inches |
|---|---|---|
| XS | 17 cm | 6.69" |
| S | 18 cm | 7.09" |
| M | 19 cm | 7.48" |
| L | 20 cm | 7.87" |
| XL | 21 cm | 8.27" |
| XXL | 22 cm | 8.66" |
Bead Size Reference
▲ TOP
Find Your Ring Size
We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.
Size Yourself
Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.
Tips for Measuring a Man’s Ring Size:
Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.
▲ TOP