Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP

 Standard Necklace Sizes

45cm (17.70”) – Base of the neck (*for smaller neck sizes)
50cm (19.69”) – to collarbone (*most common length for average men)
60cm (23.62”) – A few inches below the collarbone
70cm (27.56”) – Just at or above the sternum
80cm (31.50”) – Just above the sternum

 ▲ TOP

Wrap around your wrist using a thin flexible measuring tape, and measure where you would like to wear your bracelet. 

If you don't have a flexible measuring tape handy, you may use a strip of thin paper or a thin string (be sure they are thin). Wrap and mark where it overlaps on your wrist, and then lay the strip or string flat to measure up to the mark using a standard ruler.

Beaded Bracelets

• Custom wrist size up to 9.5" just contact us before ordering or with order number before we ship the package.

Bead Size Reference

  ▲ TOP

Find Your Ring Size

We use US ring size. To ensure the most accurate ring size, we recommend you visit your local jeweler for a professional sizing.

Size Yourself

Wrap a thin strip of paper or piece of string around the base of the finger you want to measure. With a pen, mark the point on the paper or string where it overlaps, forming a circle on the finger. Measure the length of the paper or string using a flat ruler, from the starting point to the pen mark. Then find the matching size in the chart below.

Tips for Measuring a Man’s Ring Size: 

Don’t measure cold fingers, as this is when fingers are the smallest. The best time to measure a finger is at the end of the day when the finger is the largest. Take at least two measurements for accuracy.

Ring Size Chart →

 ▲ TOP